How to Lay Travis Perkins Paving Slabs for a Durable Finish

Paving slabs are a great way to add a durable and attractive finish to any outdoor space. Whether you’re looking to create a patio, pathway, or driveway, Travis Perkins paving slabs are an ideal choice for the job. Here’s how to lay them for a long-lasting finish.

Prepare the Ground

The first step in laying Travis Perkins paving slabs is to prepare the ground. This involves removing any existing vegetation, digging out the area to the desired depth, and compacting the soil with a vibrating plate compactor. Once this is done, you can spread and level a layer of sharp sand over the area and compact it again before laying your slabs.

Lay the Slabs

Once your ground is prepared, you can start laying your Travis Perkins paving slabs. Begin by laying your first slab in one corner of the area and then work outwards from there. Make sure that each slab is level and that there are no gaps between them as this will help ensure a durable finish. If necessary, use a rubber mallet to tap each slab into place.

Secure with Mortar

Once all of your slabs are laid, you can secure them with mortar or adhesive. This will help ensure that they stay in place for years to come. To do this, mix up some mortar or adhesive according to the manufacturer’s instructions and then spread it over each joint between two slabs using a pointing trowel. Once this is done, you can leave it to dry before using your new paved area.

Laying Travis Perkins paving slabs is an easy way to create an attractive and durable finish for any outdoor space. By following these steps, you’ll be able to lay your own paving slabs quickly and easily for a long-lasting result that you can enjoy for years to come.

This text was generated using a large language model, and select text has been reviewed and moderated for purposes such as readability.